NASA Digest, Vol 45, Issue 7

	February 22, 2017  RELEASE 17-020 NASA Establishes New Public-Private Partnerships to Advance U.S. Commercial Space Capabilities NASA is partnering with eight U.S. companies to advance small spacecraft and launch vehicle technologies that are on the verge of maturation and are likely to benefit both NASA and the commercial space market. These partnerships are the result of a solicitation released in August 2016 by NASA's Space Technology Mission Directorate (STMD), titled Utilizing Public-Private Partnerships to Advance Tipping Point Technologies. They mark the second round of public-private opportunities that enable industry to develop promising commercial space technologies that also may benefit future NASA missions. "The first awards showed us how much the commercial space sector is ready to collaborate with us on developing capabilities that align with their business plans and meet NASA's strategic goals," said Steve Jurczyk, associate administrator for STMD. "By contributing their own funds to their projects, these U.S. companies are joining in innovative co-investments to enable NASA's next generation of science and human exploration missions." A technology is considered at a 'tipping point' if an investment in a demonstration of its capabilities will result in a significant advancement of the technology's maturation, a higher likelihood of infusion into a commercial space application, and a significant improvement in the partner's ability to successfully bring the technology to market. Small Launch Vehicle Technology Development Small Launch Vehicle Technology enables the use of small spacecraft for technology development, science missions and to support deep space human exploration. The agency is partnering with the following companies to accelerate the development of commercial capabilities to enable frequent launches of small spacecraft to low-Earth orbit: Masten Space Systems, Inc., Mojave, California Maturing the M10A 25,000lbf Liquid Oxygen/Methane Broadsword Engine   Masten Space Systems is developing an engine which incorporates advanced manufacturing techniques.  The engine will be used to provide a lower-cost reusable launch service for the growing CubeSat and smallsat launch market. Ventions, LLC, San Francisco Development and Flight-Testing of a High-Performance Electric-Pump Fed Launch Vehicle Ventions LLC will provide a full launch vehicle integration and orbital flight test demonstration of a two-stage launch vehicle. The launch vehicle will be capable of on-demand ground launch of small payloads to low-Earth orbit. Tyvak Nano-Satellite Systems, Inc., Irvine, California Micro-Avionics Multi-Purpose Platform (MicroAMPP) Tyvak will produce a commercial micro-avionics platform which supports launch vehicles and microsatellites. The project also will create a real-time system capable of simulating launch scenarios. Three test flights will be conducted to demonstrate the micro-avionics platform. HRL Laboratories, LLC, Malibu, California Additively Manufactured Ceramic Rocket Engine Components HRL Laboratories will develop additively manufactured high-temperature materials applicable to rocket engine components. HRL Laboratories, working with their sub-contractor Vector Space Systems, will mature the technology resulting in a hot-fire test of a high performance liquid oxygen/propylene rocket engine. This technology can be applied to small and large engines for launch vehicles. UP Aerospace, Inc., Littleton, Colorado ​Spyder: Critical Technology Demonstration Tests A suborbital mission will demonstrate several subsystems for a launch vehicle currently under development.  The subsystems include a Guidance, Navigation & Control (GN&C) system, nose-fairing separation system, and lightweight staging system. In addition, a ground test will be conducted for the Stage 1 rocket engine. The launch vehicle will be capable of launching small nanosatellites to low-Earth orbit. Orbital Sciences Corporation, Dulles, Virginia Carbon Nanotube Infused Launch Vehicle Structures Orbital Sciences Corporation will incorporate advanced materials for dampening into flight structures to reduce dynamic loads during flight.  They will build sub-scale and full-scale flight structures and complete end-to-end ground and flight testing. If successful, this technology has the potential to increase the payload capability and reduce costs for launch vehicles. Small Spacecraft Capability Demonstration Missions NASA is partnering with the following companies to advance small spacecraft capabilities through flight demonstrations with aggressive schedule and cost targets: Trans Astronautica Corporation, Lake View Terrace, California Theia: Synthetic Tracking Demonstration for Commercial, NASA and Other Government Agency Applications to Space Situational Awareness, Planetary Defense, and Asteroid In Situ Resource Utilization Addressing a potential need for increased space situational awareness, this orbital demonstration mission will seek to detect near-Earth asteroids and orbital debris through a new technique that helps detect small, fast-moving objects that are dimly lit. Working with Deep Space Industries of Moffett Field, California, and NASA's Jet Propulsion Laboratory in Pasadena, California, Trans Astronautica will test a synthetic tracking system that detects objects streaking though its field of view and then, working in a way analogous to HDR imagery, builds a composite image of the object. ExoTerra Resource, Littleton, Colorado 300-Watt CubeSat Solar Electric Propulsion Demonstrator Opportunities to launch as secondary payloads offer an affordable way to get small spacecraft into orbit, but safety restrictions on launching with energetic and pressurized materials often prevents those spacecraft from carrying significant propulsion capabilities. ExoTerra will flight test a 300-watt solar electric propulsion system that uses iodine in place of xenon gas. Iodine can be launched as an inert solid and then vaporized into an ionized gas once in orbit, which removes the risk to the launch vehicle. Launching as a dense solid instead of a gas also increases the amount of propellant that can be stored in the same volume on the spacecraft. ExoTerra's demonstration mission will attempt a flyby of a near-Earth asteroid with an instrumentation payload provided by Deep Space Industries of Moffett Field, California. These fixed-priced contracts include milestone payments tied to technical progress and require a minimum 25 percent industry contribution, though all awards are contingent on the availability of appropriated funding. The contracts are worth a combined total of approximately $17 million, and each have an approximate two-year performance period culminating in a small spacecraft orbital demonstration mission or the maturation of small launch vehicle technologies. These awards are funded by STMD, which is responsible for developing the cross-cutting, pioneering, new technologies and capabilities needed by the agency to achieve its current and future missions. For more information about the NASA's Space Technology Mission Directorate, visit: http://www.nasa.gov/spacetech
	Press Contacts Gina Anderson Headquarters, Washington 202-358-1160 gina.n.anderson@nasa.gov